Thursday, February 26, 2015

4.3.2.5 Packet Tracer - Investigating Directly Connected Routes Instructions

Packet Tracer - Investigating Directly Connected Routes


Topology
4.3.2.5 Packet Tracer - Investigating Directly Connected Routes Instructions
4.3.2.5 Packet Tracer - Investigating Directly Connected Routes Instructions
Objectives

Part 1: Investigate IPv4 Directly Connected Routes
Part 2: Investigate IPv6 Directly Connected Routes

Background

The network in the activity is already configured. You will log in to the routers and use show commands to discover and answer the questions below about the directly connected routes.
Note: The user EXEC password is cisco and the privileged exec password is class.

Part 1:     Investigate IPv4 Directly Connected Routes

Step 1:     Use show commands to gather information about the IPv4 directly connected networks.

Enter the following command on R1:
R1> show ip route ?
a.     What option would be most beneficial in determining the networks assigned to the interfaces of the router? ____________________
b.    Which networks are directly connected on R1? Hint: Use the option determined above.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
c.     Which IP addresses are assigned to the LAN interfaces on R1?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________



d.    Which networks are directly connected on R2?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
e.     Which IP addresses are assigned to the LAN interfaces on R2?
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________

Step 2:     Verify PC addressing and test connectivity.

a.     Open a command prompt on PC1. Issue the command to display the IP settings. Based on the output, would you expect PC1 to be able to communicate with all interfaces on the router? Provide a short answer describing your expectations.
____________________________________________________________________________________
b.    Open a command prompt on PC2. Issue the command to display the IP settings. Based on the output, would you expect PC2 to be able to communicate with PC1? Verify your expectations. _______________
c.     Determine the IP addresses of PC3 and PC4. Record the results and determine if PC3 and PC4 are able to communicate.
____________________________________________________________________________________
d.    Test connectivity from PC1 to PC3. Was the test successful? ______________
e.     Bonus: Looking at the outputs of the routing tables on R1 and R2, what might indicate a reason for the success or failure of communication between PC1 and PC3? ___________________________________

Part 2:     Investigate IPv6 Directly Connected Routes

Step 1:     Use show commands to gather information about the IPv6 directly connected networks.

a.     Which IPv6 networks are available on R1?
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
b.    Which IPv6 unicast addresses are assigned to the LAN interfaces on R1?
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________


c.     Which IPv6 networks are available on R2?
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
d.    Which IPv6 addresses are assigned to the LAN interfaces on R2?
____________________________________________________________________________________
____________________________________________________________________________________

Step 2:     Verify PC settings and connectivity.

a.     Open a command prompt on PC1. Issue the command to display the IPv6 settings. Based on the output, would you expect PC1 to be able to communicate with all interfaces on the router? Provide a short answer describing your expectations
____________________________________________________________________________________
____________________________________________________________________________________
b.    Open a command prompt on PC2. Issue the command to display the IPv6 settings. Based on the output, would you expect PC2 to be able to communicate with PC1? Verify your expectations. _______________
c.     Determine the IPv6 addresses of PC3 and PC4. Record the results and determine if PC3 and PC4 are able to communicate.
____________________________________________________________________________________
d.    Test connectivity from PC1 to PC3. Was the test successful? ______________
e.     Bonus: What might indicate a reason for the success or failure of communication between PC1 and PC3 after looking at the outputs of the IPv6 routing tables on R1 and R2?
____________________________________________________________________________________
____________________________________________________________________________________

Suggested Scoring Rubric

Activity Section
Question Location
Possible Points
Earned Points
Part 1: Investigate IPv4 Directly Connected Routes
Step 1
25

Step 2
25

Part 2: Investigate IPv6 Directly Connected Routes
Step 1
25

Step 2
25

Total Score
100



1 comment:

  1. Ticara, Titanium Body, Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara
    Ticara Ticara Ticara Ticara gold titanium Ticara Ticara Ticara Ticara columbia titanium jacket Ticara Ticara Ticara Ticara ceramic vs titanium flat iron Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara seiko titanium Ticara apple watch series 6 titanium Ticara Ticara Ticara Ticara Ticara Ticara Ticara Ticara

    ReplyDelete