Tuesday, February 24, 2015

1.3.1.3 Packet Tracer - Skills Integration Challenge Instructions

Packet Tracer - Skills Integration Challenge


Addressing Table

Device
Interface
IP Address
Subnet Mask

VLAN 1

255.255.255.0

VLAN 1

255.255.255.0

NIC

255.255.255.0

NIC

255.255.255.0
Objectives

·         Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI).
·         Use Cisco IOS commands to specify or limit access to the device configurations.
·         Use IOS commands to save the running configuration.
·         Configure two host devices with IP addresses.
·         Verify connectivity between the two PC end devices.

Scenario

As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.

Requirements

·         Use a console connection to access each switch.
·         Name ______________________ and ______________________ switches.
·         Use the ______________________ password for all lines.
·         Use the ______________________ secret password.
·         Encrypt all clear text passwords.
·         Include the word warning in the message-of-the-day (MOTD) Banner.
·         Configure addressing for all devices according to the Addressing Table.
·         Save your configurations.
·         Verify connectivity between all devices.
Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements.


No comments:

Post a Comment